Solving Problems 91
Solving Network Problems
You don’t see your projector in the EMP Monitor window.
■ Make sure that you’ve connected the projector to the network and
configured it correctly; see page 95. Also, make sure you’ve
registered the projector with EMP Monitor; see page 99.
■ Make sure that Standby Mode in the projector’s Extended menu
is set to
Network On; see page 62.
■ If the computer you are using is running Windows XP or 2000,
or Windows Vista,
®
you must be logged in as the Administrator.
■ Try restarting your computer.
You don’t receive an e-mail over the network when a
projector problem occurs.
■ Make sure that Standby Mode in the projector’s Extended menu
is set to
Network On; see page 62.
■ Make sure that you’ve connected the projector to the network and
configured it correctly; see page 95.
■ Make sure you set up projector e-mail alerts correctly in the
Network menu (see page 97) or in EMP Monitor (see page 102).
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson’s support website for solutions to common problems with
the PowerLite 400W. You can download utilities and documentation,
get FAQs and troubleshooting advice, or e-mail Epson with your
questions.
Visit Presenters Online to access tips, templates, and training for
developing successful presentations.
To Next Page
Loading...
Need help?
General