2. Connect the other end to the projector's DisplayPort connector.
Note: The location of the port may differ depending on the projector model.
Note: If you have problems hearing audio through the DisplayPort connection, you can use the Audio3
port instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack audio cable to the
projector's Audio3 port and the other end to your computer's audio out port. Then select Audio3 for the
DisplayPort Audio Output setting in the Extended menu.
Parent topic: Connecting to Computer Sources
Connecting to a Computer for 5 BNC Video
You can connect the projector to your computer using an optional VGA-to-5-BNC cable.
1. Connect the VGA connector to your computer's monitor port.
34
To Next Page
Loading...
Need help?
General