113
3. To reduce the image size, press the T (Tele) button.
After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the
image position.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Digital Zoom setting in the projector menus.
Parent topic: Using Basic Projector Features
Related references
Installation Settings - Installation Menu
Adjusting the Image Position
You can use the Image Shift feature to adjust the image position without moving the projector. Wait at
least 30 minutes after you start projecting to adjust the image position.
Note: This feature is not available if the Zoom option is set to the widest setting.
To Next Page
Loading...
Need help?
General