173
Parent topic: Adjusting Projector Features
Input Sources for Split Screen Projection
You can choose most input source combinations for split screen projection, but the following
combinations are not supported:
• HDMI2, HDMI3, HDBaseT
• Computer1, Computer2, Video
• USB1, USB2, USB Display, LAN (when Content Playback is Off)
• USB, USB Display, LAN (when Content Playback is On)
Note: When you split the screen into quarters and select the USB1 or USB input source, you can select
only Screen Mirroring1 or Screen Mirroring2 for the other input sources.
Parent topic: Projecting Multiple Images Simultaneously
Split Screen Projection Restrictions
You cannot perform the following operations during split screen projection:
• Change settings in the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Auto)
• Operations using the User button on the remote control, other than displaying the network information
on the projected surface
• Applying the Dynamic Contrast setting
• Displaying the network information on the projected surface by a method other than pressing the User
button
• Displaying the Screen Mirroring information bar
Image restrictions
• Even if you set No-signal screen to Logo in the Display menu, the blue screen appears when no
image signal is being input
• When you create a single, unified image projected from multiple projectors and use the split screen
feature, the second projector detects no image signal
Parent topic: Projecting Multiple Images Simultaneously
To Next Page
Loading...
Need help?
General
