184
You see this screen:
4. Select one of the following options:
• Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
Note: You can save the following settings:
• Image menu settings for each color mode
• Video Range and Overscan in the Signal I/O menu
• Light Source Mode and Brightness Level in the Operation menu
• Color Matching in the Multi-Projection menu
• Erase Memory: Erases the selected memory settings
To Next Page
Loading...
Need help?
General