Epson PowerLite S18+ User Manual

Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been used in
Normal and ECO Power Consumption modes; if the information is
displayed in yellow, obtain a genuine Epson replacement lamp
soon
Source Displays the name of the port to which the current input source is
connected
Input Signal Displays the input signal setting of the current input source
Resolution Displays the resolution of the current input source
Video Signal Displays the video signal format of the current input source
(PowerLite S18+/W18+/X24+)
Refresh Rate Displays the refresh rate of the current input source
Sync Info Displays information that may be needed by a service technician
118

Epson PowerLite S18+ Specifications

General

Native aspect ratio	4:3
Projection distance	0.88 - 10.44 m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	23 - 350 \
Projector native resolution	SVGA (800x600)
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focal length range	16.9 - 20.28 mm
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Full HD	No
Analog signal format system	-
AC (power) in	Yes
Composite video in	0
USB 2.0 ports quantity	2
Noise level	37 dB
Noise level (economic mode)	29 dB
RMS rated power	2 W
Placement	Desktop
Product type	Standard throw projector
Product color	Black
Power consumption (standby)	- W
Cables included	USB, VGA

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g