Epson PowerLite S18+ - Installing Batteries in the Remote Control

• For the Epson DC-20 document camera, connect it to the projector's HDMI (PowerLite
S18+/W18+/X24+), Computer, or Video (PowerLite S18+/W18+/X24+) port and to the corresponding
port on the document camera. See the document camera manual for details.
Note: For additional features supported by software, connect your document camera to your computer
instead of the projector. See the document camera manual for details.
Parent topic: Projector Connections
Related references
Optional Equipment and Replacement Parts
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
40