EasyManuals Logo

Epson PowerLite S18+ User Manual

Epson PowerLite S18+
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
3. Plug the power cord into an electrical outlet.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
The projector's power light turns blue. This indicates that the projector is receiving power.
4. Press the power button on the projector or the remote control to turn on the projector.
The projector beeps and the Status light flashes blue as the projector warms up. Once the projector
is warmed up, the Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is
especially dangerous for children.
If you do not see a projected image right away, try the following:
Verify the lens cover is open all the way.
Turn on the connected computer or video device.
Insert a DVD or other video media and press the play button, if necessary (PowerLite
S18+/W18+/X24+).
Press the Source Search button on the projector or remote control to detect the video source.
Press the button for the video source on the remote control.
Parent topic: Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Related tasks
Selecting an Image Source
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note: Your product may look different from the illustrations in this guide, but the instructions are the
same.
63

Table of Contents

Other manuals for Epson PowerLite S18+

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite S18+ and is the answer not in the manual?

Epson PowerLite S18+ Specifications

General IconGeneral
Native aspect ratio4:3
Projection distance0.88 - 10.44 m
Projection technology3LCD
Contrast ratio (typical)10000:1
Screen size compatibility23 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)2100 ANSI lumens
Focal length range16.9 - 20.28 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)6000 h
Full HDNo
Analog signal format system-
AC (power) inYes
Composite video in0
USB 2.0 ports quantity2
Noise level37 dB
Noise level (economic mode)29 dB
RMS rated power2 W
PlacementDesktop
Product typeStandard throw projector
Product colorBlack
Power consumption (standby)- W
Cables includedUSB, VGA
Weight and Dimensions IconWeight and Dimensions
Depth234 mm
Width297 mm
Height77 mm
Weight2400 g

Related product manuals