EasyManuals Logo

Epson PowerLite W16 User Manual

Epson PowerLite W16
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB-A
port shown here.
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related topics
Projecting a Slide Show
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to a USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
3. Press the button again to cycle through other USB sources, if available.
Parent topic: Connecting to External USB Devices
Disconnecting a USB Device or Camera From the Projector
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic: Connecting to External USB Devices
39

Table of Contents

Other manuals for Epson PowerLite W16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite W16 and is the answer not in the manual?

Epson PowerLite W16 Specifications

Display IconDisplay
pixel number1, 024, 000 dots (1280 x 800) x 3
color brightness3000 lumens in 2D mode
white brightness3000 lumens in 2D mode
aspect ratioNative 16:10 widescreen, supports 16:9/4:3
native resolution1280 x 800 (WXGA)
Lamp IconLamp
lamp type200 W UHE (E-TORL)
lamp life (ECO mode)Up to 5000 hours
lamp life (normal mode)Up to 4000 hours
Projection IconProjection
throw ratio range1.30 – 1.56
size (projected distance)33" – 318"
keystone correction (automatic)Vertical: ± 30 degrees, Horizontal: ± 20 degrees
Power IconPower
power supply voltage100 – 240 V AC, ±10%, 50/60 Hz
power consumption (ECO mode)237 W
power consumption (normal mode)289 W
Dimensions and Weight IconDimensions and Weight
dimensions including feet12.8" x 9.6" x 3.1"
dimensions excluding feet12.8" x 9.6" x 3.0"
weight6.0 lb

Related product manuals