Publishing Discs 30
2. Click the Publish button.
c
Caution:
❏ Do not open the disc cover while the product is publishing discs, unless the application
instructs to add or remove discs. This may affect write quality or print quality. Also, do not
put your hands inside the product while beeping as arm is still moving.
❏ Beep will sound if you open disc cover while running a job, and the job will pause. Closing
the disc cover automatically resume the job.
❏ Do not operate the stacker while beeping, as the arm may be damaged.
❏ If you need to open the disc cover, pause or cancel your job before opening the disc
cover.
❏ Depending on the disc or the computer used, writing speed may become slower than the
set speed.
❏ Depending on the disc used, the recommended writing speed of the disc cannot be used.
In this case, reduce the writing speed. Especially with DVD±R DL, it is recommended to
write with slow speed.
Note:
If Windows shuts down while processing a job, the job may be resumed when restarting Windows
next time.
To Next Page
Loading...
Need help?
General
