Product Information 91
c
Caution:
Before opening the rear printer cover, be sure to unplug the power cable from the wall outlet.
Be sure to attach this cover while in use.
e. AC inlet: Plug in the power cord.
f. USB connector: Connects a USB cable from your computer to the product.
g. Interface cable locking saddle: Use this for directing and gathering the cable.
h. Air Vent: Leave at least 10 cm (3.94") between the back of the product and the wall for
ventilation.
i. Rear printer cover: Open this cover only when a disc is stuck in the printer tray.
j. Drive 1: Writes data on the recording surface of discs.
To Next Page
Loading...
