Epson Printer Administrator's Guide

Default Policy Setting Items
Items Settings and Explanation
IPsec/IP Filtering You can enable or disable an IPsec/IP Filtering feature.
Access Control Congure a control method for trac of IP packets.
Permit Access Select this to permit congured IP packets to pass through.
Refuse Access Select this to refuse congured IP packets to pass through.
IPsec Select this to permit congured IPsec packets to pass
through.
Authentication Method
To select Certicate, you need to obtain and import a CA-signed certicate in advance.
Pre-Shared Key
If you select Pre-Shared Key for Authentication Method, enter a pre-shared key between 1
and 127 characters.
Conrm Pre-Shared Key Enter the key you congured for conrmation.
Encapsulation
If you select IPsec for Access Control, you need to congure an encapsulation mode.
Transport Mode If you only use the printer on the same LAN, select this. IP
packets of layer 4 or later are encrypted.
Tunnel Mode If you use the printer on the Internet-capable network such
as IPsec-VPN, select this option. The header and data of the
IP packets are encrypted.
Remote Gateway(Tunnel
Mode)
If you select Tunnel Mode for Encapsulation, enter a gateway address between 1 and 39
characters.
Administrator's Guide
Using the Printer in a Secure Network
19

Epson Printer Specifications

General

Brand	Epson
Model	Printer
Category	Printer
Language	English