Epson Printer Administrator's Guide

Group Policy Setting Items
Items Settings and Explanation
Enable this Group Policy You can enable or disable a group policy.
Access Control Congure a control method for trac of IP packets.
Permit Access Select this to permit congured IP packets to pass through.
Refuse Access Select this to refuse congured IP packets to pass through.
IPsec Select this to permit congured IPsec packets to pass
through.
Local Address(Printer) Select an IPv4 address or IPv6 address that matches your network environment. If an IP
address is assigned automatically, you can select Use auto-obtained IPv4 address.
Remote Address(Host) Enter a device's IP address to control access. The IP address must be between 0 and 43
characters. If you do not enter an IP address, all addresses are controlled.
Note:
If an IP address is assigned automatically (e.g. assigned by DHCP), the connection may
be unavailable. Congure a static IP address.
Method of Choosing Port Select a method to specify ports.
Service Name
If you select Service Name for Method of Choosing Port, select an option.
Transport Protocol
If you select Port Number for Method of Choosing Port, you need to congure an
encapsulation mode.
Any Protocol Select this to control all protocol types.
TCP Select this to control data for unicast.
UDP Select this to control data for broadcast and multicast.
ICMPv4 Select this to control ping command.
Administrator's Guide
Using the Printer in a Secure Network
21

Epson Printer Specifications

General

Brand	Epson
Model	Printer
Category	Printer
Language	English