Epson Printer

Mail Server Setting Items
Items Settings and Explanation
Authentication Method Specify the authentication method for the printer to access the mail server.
O Authentication is disabled when communicating with a mail
server.
SMTP AUTH Requires that a mail server supports SMTP Authentication.
POP before SMTP Congure the POP3 server when selecting this method.
Authenticated Account
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated account name between 0 and 30 characters in ASCII (0x20-0x7E).
Authenticated Password
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated password between 0 and 20 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ?
^ _ { | } ~ @.
Sender's Email Address Enter the sender’s email address. Enter between 0 and 255 characters in ASCII (0x20-0x7E)
except for : ( ) < > [ ] ; ¥. A period "." cannot be the rst character.
SMTP Server Address Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.
SMTP Server Port Number Enter a number between 1 and 65535.
POP3 Server Address
If you select POP before SMTP as the Authentication Method, enter the POP3 server
address between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN
format.
POP3 Server Port Number
If you select POP before SMTP as the Authentication Method, enter a number between 1
and 65535.
Administrator's Guide
Conguring Scan and Fax Destination
46