1. Introduction
4 Part Feeding 7.0 IF-240 Rev.5
1.2 Safety precautions
1.2.1 General safety precaution
1.2.1.1 Transport
DANGER
Be aware of the weight and take care when transporting the
system. For more information, please refer to 3. Transportation
handling and installation.
1.2.1.2 General
DANGER
Be sure that all power sources and other cables to the unit are
disconnected before working on the product.
Only qualified personnel (trained by Epson
professional experience) are authorized to work on this device.
Do not access the housing of the system controls. Serious
injury or death could result from electric shock. Only
authorized personnel from Epson are allowed to access this
part of the system for maintenance or for repair.
Do not plug or unplug cables of the system unless it is switched
off.
Never modify the product.
Unauthorized modification may
cause the product to malfunction, resulting in injury, electric
shock, fire, etc.
Turn off the power to the product in the event of power failure.
Failure to do so may cause the product to suddenly start
moving when the power is restored.
Do not use the product in a place where it may come in contact
with water or oil droplets.
To Next Page
Loading...
Need help?
General
