Epson RC+ 7.0 User Manual

4. Maintenance and component replacement
28 Part Feeding 7.0 IF-240 Rev.5
4.2.3 Control and cleaning of the platform
Material needed:
- Lint-free cloth
- Isopropanol alcohol
Figure 4-2: Platform
Step 1
Control the surface state of the platform (A) and be particularly careful of the following
points:
- Dirt or spotted surface
- Oily or greasy surface
WARNING
If the surface is damaged so as to obstruct vision or the
behavior of parts, its replacement must be preceded.
For more information about maintenance parts, please
contact the supplier of your region.
Step 2
Clean the surface of the platform.

Epson RC+ 7.0 Specifications

General

Brand	Epson
Model	RC+ 7.0
Category	Control Unit
Language	English