65
Direct Wi-Fi Mode (AP Mode) Setup
You can set up your scanner to communicate directly with your computer or another device without
requiring a wireless router. If your product is not already connected to a wireless network, it enters
access point mode and the scanner itself acts as the network access point for up to 4 devices.
1 Epson scanner
2 Computer with a wireless interface
3 Other wireless devices
Note: Devices directly connected to the scanner cannot communicate with each other through the
scanner.
Connecting to a Mobile Device
Setting Up Wireless Scanning from a Smart Device Using Epson Smart Panel
Parent topic: Wi-Fi Networking
To Next Page
Loading...
