Epson SC-F3000 Series

Product Part number Explanation
Platen Grip Pad - S C13S210120 A grip pad for using the S-size hanger platen as a grip pad
covered platen.
Pre-treatment roller set C12C891201 Set of roller sections x3, handle, and tray.
Replacement rollers for
pre-treatment (3 pieces)
C12C891211 The same as the roller section supplied with the
Pre-treatment roller set.
Hard roller C12C891221 Set of roller sections (hard) and handle.
Grip Pad Tool C12C934151 The same as the grip pad tool supplied with the printer.
For SC-F3080
Product Part number Explanation
Pre-treatment Liquid T43R1
T7361
20 liters. Dilute before use.
U “Pre-treatment” on page 39
Polyester Pre-treatment Liquid T43R2 18 liters. Use undiluted or diluted depending on the ink
used for printing.
U “Pre-treatment” on page 39
Hanger Platen - L C12C936251 Printable area: 16" x 20"/406 x 508 mm
Hanger Platen - M C12C936271 Printable area: 14" x 16"/356 x 406 mm
Hanger Platen - S C12C936291 Printable area: 10" x 12"/254 x 305 mm
Extra Small Platen C12C934011 Printable area: 7" x 8"/178 x 203 mm
Sleeve Platen C12C934031 This platen allows you to print on T-shirt cuffs.
Printable area: 4" x 4"/102 x 102 mm
Medium Grooved Platen C12C934021 This platen allows you to print correctly on polo shirts as
well as shirts with zippers and buttons.
Printable area: Equivalent to the area for M size hanger
platen
Platen Grip Pad - L C13S210121 A grip pad for using the L-size hanger platen as a grip pad
covered platen.
Platen Grip Pad - M C13S210122 A grip pad for using the M-size hanger platen as a grip pad
covered platen.
Platen Grip Pad - S C13S210123 A grip pad for using the S-size hanger platen as a grip pad
covered platen.
Pre-treatment roller set C12C891201 Set of roller sections x3, handle, and tray.
Replacement rollers for
pre-treatment (3 pieces)
C12C891211 The same as the roller section supplied with the
Pre-treatment roller set.
Hard roller C12C891221 Set of roller sections (hard) and handle.
Grip Pad Tool C12C934161 The same as the grip pad tool supplied with the printer.
SC-F3000 Series User's Guide
Appendix
136