Epson SC-F3000 Series User Manual

E
Slide the hem of the T-shirt over the platen from
the front.
The line inside the frame in the illustration
indicates the center of the platen. (L/M/S size
hanger platens only)
F
Pull the parts of the shirt that extend beyond the
platen to flatten the print surface.
c
Important:
Do not pull too hard on the T-shirt. If the
T-shirt is stretched too much, the print quality
may decline due to deformed images and so
on, and the white under-base print may
extend outside the image.
G
Attach the platen frame again.
H
Remove any lint from the printing surface, and
press the fibers flat.
There may be lint on the T-shirt if you have not
applied pre-treatment liquid. Remove the lint
using the sticky tape or roller and press the fibers
flat using the hard roller. Lint and fibers may stick
to the print head and stain other areas.
SC-F3000 Series User's Guide
Basic Printing
63

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English