Epson SC-F6200 Series - Page 61

C
Hook a finger into the indentation on top of
slider and pull it straight out.
c
Important:
Do not tilt the slider. Dropping the chip unit
may damage it.
D
Remove the chip unit from the slider.
E
Install the chip unit that comes with the new ink
pack.
During installation, check to ensure that the
labels on the slider and the chip unit are the same
color.
F
Hold the slider level horizontally and insert it.
Close the side cover.
c
Important:
Do not push the slider in with excessive force.
This can cause damage.
SC-F6200 Series/SC-F6000 Series User's Guide
Maintenance
61