F
Turn all the fixing levers (4 locations) back
lengthwise to lock them.
c
Important:
Be sure to lock all the fixing levers.
If they are not locked, ink could leak when the
printer is used.
G
Close the carriage cover.
c
Important:
Make sure the carriage cover is securely locked.
H
Close the maintenance coveron the right.
Disposing of Used Print Heads
U “Disposing of Used Print Heads” on
page 19
Process after
Replacement
When Print Head replacement is complete, perform
operations in the following order. Follow the on-screen
instructions.
Fill the Print Head with ink
Print a nozzle check pattern to check if nozzles are
clogged
Perform automatic adjustments
c
Important:
Do not unplug the power plug from the outlet or trip
the circuit breaker during the following operations.
Otherwise, operations may not be performed
correctly and a malfunction may occur.
A
Load the adjustment media in the printer.
You do not need to load the media in the take-up
unit.
Loading Media UUser's Guide (Online
Manual)
B
Connect the power cable plug to an electrical
outlet.
C
Start the printer in User Self Repair Mode.
U “How to Start in User Self Repair Mode” on
page 9
The ink starts filling automatically.
D
When the screen switches to Print Head Nozzle
Check, make sure Pattern Settings is set to
Standard, and then press Start.
The nozzle check pattern is printed.
SC-R5000 Series/SC-R5000L Series User Self Repair Guide
Replacing and Adjusting the Print Head
18
To Next Page
Loading...
