Epson SC-R5000 Series - Work Flow; U How to Start in User Self Repair Mode

Work Flow
1. Start the printer in User Self Repair Mode
U “How to Start in User Self Repair Mode” on page 9
2. Run Diagnosis from the Repair Menu
Take measures according to the diagnostic results. In some cases, you may not need to replace the Self Repair parts, you may only
need to perform Cleaning (Heavy) or clean the anti-drying caps.
U “How to Do Diagnosis” on page 10
When the diagnosis indicates that the
Print Headneeds to be replaced
Perform either according to the results of the anti-drying caps
diagnosis
3. Replace the Print Head, and
continue to adjust the Print Head
U “Replacing and Adjusting the Print
Head” on page 11
3. Clean the anti-drying caps
UUser's Guide (Online Manual)
3. Replace the anti-drying caps
U “Replace the Anti-Drying Caps” on
page 21
SC-R5000 Series/SC-R5000L Series User Self Repair Guide
Work Flow
8