E
Check the nozzle check pattern.
If there are no clogged nozzles
Select
.
If there are clogged nozzles
Select
, and then do Head Cleaning until the
clogged nozzles are cleared.
First, perform Cleaning (Light). Print a nozzle
check pattern (Standard), and if the nozzles
remain clogged, perform Cleaning (Medium).
Print a nozzle check pattern (Standard) again,
and if the nozzles are still not cleared, perform
Cleaning (Heavy).
F
When the screen switches to Print Head
Alignment, you can continue with the
adjustment process.
Press Start to start automatic adjustments.
Adjustments are performed automatically while
printing the adjustment pattern.
When the screen display returns to the home screen, all
the adjustment work is complete. If the adjustments are
not complete and an error is displayed, follow the
on-screen instructions to make manual adjustments.
Disposing of Used Print
Heads
Pack the used Print Head according to the following
procedure, and then contact your dealer or Epson
Support.
How to Pack
A
Apply commercially available adhesive tape to
the contacts of the connectors on the used Print
Head.
Be sure to apply the tape so that any ink left in the
nozzles cannot leak out during transport and get
into the contacts of the connectors.
B
Put the Print Head into the protective case and
close the lid.
C
Put the protective case in the plastic bag in which
was wrapped the replacement Print Head, and
then put it all in the outer carton and seal it with
adhesive tape.
Pack it securely so that the Print Head does not
come out of the box during transport.
Confirm the Adjustment
Results
A
Turn off the power to the printer, and start it
normally.
B
Send an actual print job to confirm if the print
results are improved.
c
Important:
Print jobs cannot be received while in User Self
Repair Mode. Be sure to restart in the normal
way before you send a print job.
If there are problems with the print quality,
perform Media Settings - Print Adjustments.
For details on Print Adjustments, see the User's
Guide (Online Manual).
SC-R5000 Series/SC-R5000L Series User Self Repair Guide
Replacing and Adjusting the Print Head
19
To Next Page
Loading...
