Epson SC-T3200 Series User Manual

Printer Status
Item Description
Firmware Version xxxxxxx,x.xx,xxxx You can see the firmware version.
When an optional auto take-up reel unit is connected, its firmware
version is displayed below the firmware version of the printer.
Furthermore, when an optional Adobe PostScript 3 Expansion
Unit is connected, its two control versions are displayed at the end.
Option Status Lists the optional accessories currently connected to the printer and available for use.
Show Total Prints
XXXXXX m
2
Displays the total area of media printed (to a maximum of six
digits).
Print Status Sheet
Press the Z button to print a list of current printer settings.
Choose this option to view settings at a glance.
Network Setup
Item Description
IP Address Setting
Auto
*
Select whether to use DHCP to set the IP address (Auto), or to set
the address manually (Panel). Choose Panel to enter the IP
address, Subnet Mask, and Default Gateway. Contact your
system administrator for detailed information.
Panel
IPv6 Setting Enable Select whether to enable or disable the IPv6 function.
Disable
*
IPsec Setting Enable Select whether to enable or disable the IPsec function.
Disable
*
PSK Setting Enter a Pre-Shared Key of up to 20 characters (half-width alphanumeric characters and symbols).
IEEE802.1x Setting Enable Select whether to enable or disable the IEEE802.1X function.
Disable
*
HTTPS Redirect Setting Enable Select whether to enable or disable the function to auto-direct
HTTP to HTTPS.
Disable
*
Print Status Sheet
Press the Z button to print a list of the Network Setup. Use this information for a complete
overview of network settings.
Restore Settings Yes
Select Yes to restore all Network Setup content to default values.
No
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
158

Epson SC-T3200 Series Specifications

General

Brand	Epson
Model	SC-T3200 Series
Category	All in One Printer
Language	English