Epson ST-2000 User Manual

158
Caution: Never turn off the product or open the printer cover during a cleaning cycle or you may not
be able to print.
6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related concepts
Power Cleaning

Epson ST-2000 Specifications

General

Printing Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Print Speed Black	15 ppm (ISO)
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Sizes	Letter, Legal, Envelopes
Print Width	8.5"
Interface	USB, Wi-Fi, Wi-Fi Direct
Print Speed	Up to 15 ppm (black and color)