Epson ST-2000 User Manual

34
Wi-Fi Direct Mode Setup
You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point. In Wi-Fi Direct Mode, the product itself acts as a network
access point for up to 4 devices.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device
Enabling Wi-Fi Direct Mode
Parent topic: Wi-Fi Networking
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
Note: If you are printing from a computer, make sure you installed the network software as described on
the Start Here sheet.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.

Epson ST-2000 Specifications

General

Printing Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Print Speed Black	15 ppm (ISO)
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Sizes	Letter, Legal, Envelopes
Print Width	8.5"
Interface	USB, Wi-Fi, Wi-Fi Direct
Print Speed	Up to 15 ppm (black and color)