Epson ST-2000 User Manual

179
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Settings and press the OK button.
3. Select Restore Default Settings and press the OK button.
4. Select one of these options:
• Network Settings: Resets all network settings.
• All except Network: Resets all settings except network settings.
• All Settings: Resets all settings.
You see a confirmation screen.
5. Press the OK button to reset the selected settings. (Press the stop button if you want to cancel the
operation.)
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Filling the Ink

Epson ST-2000 Specifications

General

Printing Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Print Speed Black	15 ppm (ISO)
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Sizes	Letter, Legal, Envelopes
Print Width	8.5"
Interface	USB, Wi-Fi, Wi-Fi Direct
Print Speed	Up to 15 ppm (black and color)