Epson Stylus Color 740 Product Information Guide

EPSON Stylus COLOR 740
7/98 EPSON Stylus COLOR 740
- 5
Environmental
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage*: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Transit*: –4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity Operation: 20 to 80% RH
Storage*: 5 to 85% RH (without
condensation)
* Stored in shipping container
Safety Approvals
Safety standards UL 1950, CSA 22.2 No. 950
EMC FCC part 15 subpart B class B
DOS Support
If driver support for the EPSON Stylus COLOR 740 is not
available from your software manufacturer, you can use one of
the other EPSON ESC/P 2 printer drivers (parallel port only).
These drivers don’t provide all the EPSON Stylus COLOR
740 features, such as 720 or 1440 dpi printing. Choose the
first printer available from the following two lists:
Black printing only
❏ LQ-870/1170
❏ LQ-570(+)/1070(+)
❏ SQ-870/1070
❏ LQ-850
❏ LQ-500
Color and black printing
❏ EPSON Stylus PRO
❏ EPSON Stylus COLOR 500
❏ EPSON Stylus COLOR II
❏ LQ-860
❏ LQ-2550
Control Panel Settings
You can change the following default settings from the
printer’s control panel:
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded (at
least 8.27 inches [210 mm] wide).
2. Hold down the
R cleaning button and press the
P
power
button. The printer prints instructions for changing settings
and choosing a language for the instructions.
3. Press the
E
load/eject button to print a list of current
settings (indicated with arrows) and additional instructions.
4. After you make the changes you want, turn the printer off
to save the settings. The settings remain in effect until you
change them again.
Character Tables
All character tables except Italic are the same as the PC437
table for hex codes 00 through 7F. Additional characters are
available for hex codes 80 through FF. You can select the
following character tables through the control panel or
software commands:
❏ PC437 (U.S./Standard Europe)
❏ PC850 (Multilingual)
❏ PC860 (Portuguese)
❏ PC861 (Icelandic)
❏ PC863 (Canadian-French)
❏ PC865 (Nordic)
❏ Abicomp
❏ BRASCII
❏ Roman 8
❏ ISO Latin 1
❏ Italic (no characters available for hex code 15)
International You can select a number of international
character sets character sets with the control panel or the
ESC R command. Other sets can only be
selected with the ESC R command. You
can select additional characters with the
ESC ( ^ command.
Setting Options
Font Courier, Roman, Sans Serif, Prestige, Script, Roman T, Sans
Serif H, Draft
Character
table
Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1, PC 437
(U.S./Standard Europe), PC850 (Multilingual), PC860
(Portuguese), PC861 (Icelandic), PC863 (Canadian-French),
PC865 (Nordic), Abicomp, BRASCII, Roman 8, ISO Latin 1

Epson Stylus Color 740 Specifications

General

Brand	Epson
Model	Stylus Color 740
Category	Printer
Language	English