Epson Stylus CX7300 - Start and Configure Epson Scan

43
Start the Epson Scan Program
Before you start Epson Scan, place your original
on the document table.
Windows:
Double-click the EPSON Scan icon on your Windows desktop.
Macintosh:
Open the Applications folder and click the EPSON Scan icon.
Now you can select a scan mode.
Scan From Another Program
Before you start, place your original on the document table.
1. Do one of the following to start your scanning program:
Windows:
Double-click the program icon on your desktop, if it is available. If not, click Start or ,
select All Programs or Programs, select your program folder, and click the program icon.
Macintosh:
Double-click the program icon on your desktop, if it is available. If not, open the
Applications folder, select your program folder, and double-click the program icon.
2. Select your program’s scanning option. (See your scanning program help for instructions.)
For example, in ArcSoft PhotoImpression,
™
open the File menu and select Get Photo. Then
click the Camera/Scanner icon.
Note:
In some programs, you must select the Epson Stylus CX7300 Series as the “source” first. If
you see a Select Source option, choose it and select your Epson Stylus CX7300 Series.
3. Select your Epson Stylus CX7300 Series. Epson Scan starts automatically.