67
Macintosh:
Double-click the removable disk icon for the memory card.
3. Open the folder on your computer in which you want to store your photo files.
4. Select the photos in the removable disk folder and drag them to the folder on your computer.
5. Before you disconnect or turn off the Epson Stylus CX7300 Series, or remove the memory
card, prepare the card for removal
.
See also:
Transfer Files From Your Computer to a Memory Card
Transfer Files From Your Computer to a Memory Card
Before you transfer files, make sure you installed your software and connected the Epson Stylus
CX7300 Series to your computer; see the Start Here sheet for instructions.
1. Make sure the switch or seal on your memory card is set to allow writing to the card.
2. Insert a memory card in one of the memory card slots.
3. Access the memory card files from your computer:
Windows:
Click Start or , then click My Computer or Computer. Double-click the removable disk
icon for the memory card.
Macintosh:
Double-click the removable disk icon for the memory card.
4. Open the folder on your computer where the photo files you want to transfer are stored.
5. Select the photos in the folder on your computer and drag them to the removable disk folder.
6. Before you disconnect or turn off the Epson Stylus CX7300 Series, or remove the memory
card, prepare the card for removal.
See also:
Transfer Files From a Memory Card to Your Computer
Print From a Connected Digital Camera
If you have a digital camera that supports PictBridge
™
or USB DIRECT-PRINT
™
printing, you
can connect it to the Epson Stylus CX7300 Series and print your photos directly from the camera.
Check your camera manual to see if it is compatible.
Your photos must be JPEG format and sized from 80 × 80 to 9200 × 9200 pixels.
Follow the instructions in these sections to print directly from a digital camera:
Connect the Camera
Print Photos From the Camera
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper type, size,
To Next Page
Loading...
