101
Now you can access the shared printer
from other computers on the network.
Access Shared Printer Over Network
Make sure you first set up the Epson Stylus CX7300 Series as a shared printer.
1. Turn on the Epson Stylus CX7300 Series.
2. Open your program and the document or photo you want to print.
3. Open the File menu and select Page Setup.
4. Select Stylus CX7300 from the Shared Printers list.
5. Select the rest of your settings and print your document or photo.
Specifications and Notices
For information about using your Epson Stylus CX7300 Series and detailed specifications, see:
Important Safety Instructions
Computer System Requirements
Product Specifications
Copyright and Trademarks
Important Safety Instructions
Before using your Epson Stylus CX7300 Series, read and follow these safety instructions:
General Safety
Ink Cartridge Safety
General Safety
• Be sure to follow all warnings and instructions marked on the Epson Stylus CX7300 Series.
• Use only the type of power source indicated on the Epson Stylus CX7300 Series label.
• Use only the power cord that comes with the Epson Stylus CX7300 Series. Use of another
cord may cause fires or shock. Do not use the cord with any other equipment.
• Place the Epson Stylus CX7300 Series near a wall outlet where the plug can be easily
unplugged.
• If you won’t be using the Epson Stylus CX7300 Series for a long period, unplug the power
cord from the electrical outlet.
• Always turn off the Epson Stylus CX7300 Series using the Encender (On) button, and wait
until the Encender (On) light stops flashing before unplugging the printer or cutting off
power to the electrical outlet.
• Avoid plugging the Epson Stylus CX7300 Series into an outlet on the same circuit as a photo
copier or air control system that regularly switches on and off, or on an outlet controlled by a
wall switch or timer.
• Do not let the power cord become damaged or frayed.
To Next Page
Loading...
