51
2. Select the size you want your scanned image to be from the Target Size list.
A dotted line (marquee) appears on your preview image proportioned for that size.
Note:
If you need to rotate the orientation of the scan area marquee, click the orientation icon.
3. If you need to create a scanned image size that is not in the Target Size list, select Customize.
4. Name the custom size, enter the size, click Save, and click OK. Then create a marquee on the
preview image to define the scanned image area. The size is automatically proportioned.
5. When you’re finished, you can scan and view your image
.
Scan and View Image
After selecting your scan settings, you are ready to scan and view your scanned images.
1. Click Scan.
Marquee
To Next Page
Loading...
