73
3. Click the Ink Cartridge Replacement utility icon and follow the on-screen instructions to
replace your ink cartridges as necessary.
Remove and Install Cartridges
Be sure you have your replacement cartridges
handy before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum
packed to maintain reliability.
1. Turn on the Epson Stylus CX7300 Series.
If a cartridge is expended, the ink light on the control panel stays on. You must replace the
cartridge to be able to print.
Note:
If the ink light on the control panel is flashing or off and you need to change a cartridge, run
the Ink Cartridge Replacement utility instead of following the instructions below.
2. Open the scanner.
To Next Page
Loading...
