Epson Stylus CX7300 - Page 81

81
1. Load a few sheets of plain paper
in the sheet feeder.
2. Turn off the Epson Stylus CX7300 Series.
3. Hold down the Copies button as you press the Encender (On) button to turn the Epson
Stylus CX7300 Series back on. Hold down both buttons until the Encender (On) light
begins to flash, then release the buttons.
The alignment sheet prints.
4. Look at pattern #1 and find the patch that is most evenly printed, with no noticeable streaks or
lines.
5. Press the Copies button until the number for that patch appears in the Copies window.
6. Press the Iniciar button.
7. Repeat steps 5 and 6 for each of the other alignment patterns.
From the Computer
1. Load a few sheets of plain paper in the sheet feeder.
2. Windows:
Right-click the printer icon in the bottom right corner of your screen (the taskbar) and
select Print Head Alignment.
Macintosh:
Open the Applications folder, open the EPSON Printer Utility 2, select CX7300 Series, and
click OK. Then select Print Head Alignment.
3. Follow the on-screen instructions to print an alignment sheet.
Note:
Do not press the Cancelar (Stop) button to cancel printing of the alignment sheet.
4. Check the alignment pattern that prints and compare it to the alignment criteria on your
screen.
5. Enter the number of the best pattern and click Next.