Epson Stylus Photo 750 - Paper Feeding; Paper Specification

EPSON Stylus Photo 750 Revision A
Product Description General Description 6
TYPEFACE
† Bin map LQ font: EPSON Courier, 10 CPI
1.2.2 Paper Feeding
† Feeding Method: Friction feed with ASF
† Paper Path: Cut-sheet ASF(Top entry)
† Feeding Speed: 2.36 inches/sec (normal speed mode/continuous
feeding)
4.5 inches/sec (high-speed mode/continuous
feeding)
1.2.3 Paper Specification
This section describes the printable area and types of paper which can
be used in this printer.
† Cut Sheet
„ Size: A4(Width 210mm(8.3”) x Length 297mm(11.7”))
Letter(Width 216mm(8.5”) x Length 279mm(11.0”))
Legal(Width 216mm(8.5”) x Length 356 mm(14.0”))
Statement (Width 139.7mm(5.5”) x Length 215.9mm
(8.5”))
B5(Width 182mm(7.2”) x Length 257 mm(10.1”))
Executive(Width 184.2 mm(7.25”) x Length 266.7mm
(10.5”))
Photo Paper (Width 101.6mm(4”) x Length 152.4mm(6”))
„ Thickness: 0.08mm(0.003”)-0.11mm(0.004”)
„ Weight: 64g/m
2
(17lb.) - 90g/m
2
(24lb)
„ Quality: Exclusive paper, Bond paper, PPC
† Transparency and Glossy Paper
„ Size: A4(Width 210mm(8.3”) x Length 297mm(11.7”)
Letter(Width 216 mm(8.5”) x Length 279mm(11.0”)
„ Thickness: 0.075mm(0.003”) - 0.085mm(0.0033”)
Note) Transparency printing is only available at normal temperature.
† Envelope
„ Size: No.10 Width 241mm(9 1/2”) x Length 104.8mm(4 1/8”)
DL Width 220mm(8.7”) x Length 110mm(4.3”)
C6 Width 162mm(6.4”) x Length 114mm(4.5”)
„ Thickness:0.16mm(0.006”) - 0.52 mm(0.02”)
„ Weight: 45g/m
2
(12lb) - 75g/m
2
(20lb.)
„ Quality: Bond paper, Plain paper, Air mail
Note) Envelope printing is only available at normal temperature.
Keep the longer side of the envelope horizontally at setting.
† Index Card
„ Size: A6 Index Card: Width 105mm(4.1”) x Length
148mm(5.8”)
A5 Index Card: Width 148mm(5.8”) x Length 210mm
(8.3”)
5x8” Index Card: Width 127mm(5.0”) x Length 203mm
(8.0”)
10x8” Index Card: Width 127mm(5.0”) x Length 203 mm
(8.0”)
„ Thickness: Less than 0.23mm(0.0091”)
CAUTION
„
No curled, wrinkled, scuffing or torn paper be used.
„
Printing should be performed at room temperature
for transparency and envelope.