Epson Stylus Photo 750 - Adjust Lever Settings

EPSON Stylus Photo 750 Revision A
Product Description General Description 8
† Envelope
Table 1-4. Envelope
Figure 1-4. Printable Area
1.2.5 Adjust Lever Settings
The adjust lever located under the printer cover(right side) needs to be
set for the proper paper setting according to the paper type.
Table 1-5. Setting Position of Adjust Lever
Figure 1-5. Adjust Lever
Paper Size
LM(Left
margin)
(min.)
RM(RIght
margin)
(min.)
TM(Top
margin)
(min.)
BM(Bottom
margin)
(min.)
#10 28mm(1.10”) 3mm(0.12”) 3mm(0.12”) 14mm(0.55”)
DL 7mm(0.28”) 3mm(0.12”) 3mm(0.12”) 14mm(0.55”)
C6 3mm(0.12”) 3mm(0.12”) 3mm(0.12”) 14mm(0.55”)
Printable A rea
LM
TM
RM
BM
Paper Lever position Adjustment Value
Normal paper,
Transparency
sheet, Label
+ +0.9mm
Envelope 0 0mm
+
0
Paper A djsut Lever