EasyManua.ls Logo

Epson Stylus Photo 750 - Usb(Universal Serial Bus) Interface

Epson Stylus Photo 750
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON Stylus Photo 750 Revision A
Product Description Parallel Interface 19
1.3.4 USB(Universal Serial Bus) Interface
Following shows specification.
Standard: Based on
Universal Serial Bus Specifications Revision 1.0
Universal Serial Bus Device Class Definition for Printing Devices
version 1.0
Bit rate: 12Mbyte(Full Speed Device)
Data encording: NRZI
Adaptable connector: USB Series B
Recommended cable length: 2 meters
Table 1-14. Connector pin assignment and signals
Figure 1-11. USB Interface Port
Pin.
No
Signal Name I/Out Function Description
1VCC --
Cable power. Maximum power
consumption is 100mA.
2 -Data
Bi-
directional
Data
3+Data
Bi-
directional
Data. Pull up to +3.3V via 1.5K ohm
resistor.
4 Ground -- Cable ground.
Pin 1
Pin 2
Pin 3
Pin 4

Table of Contents

Other manuals for Epson Stylus Photo 750

Related product manuals