EPSON Stylus Photo 750 Revision A
Disassembly and Assembly Disassembly 72
9. Move the whole “Roller, Assembly, PF” to the left direction, and
remove the “Roller, Assembly, PF”.
Figure 4-24. “Roller, Assembly, PF” Removal
CHECK
PO INT
„
When reinstalling “Paper Guide, Assembly, Upper”
at the right edge, be careful not to damage the “PE
Sensor Lever”.
„
Be careful not to damage the hook, when removing
or installing “Paper Guide, Front; B”.
„
Be careful not to damage the black coated part of
“Roller, Assembly, PF” during disassembly and
assembly.
„
Be careful not to damage the gear, especially
engaging part.
Put "RO LLER, ASSEM BLY, PF" through here
ROLLER, ASSEM BLY, PF
To Next Page
Loading...
