Epson Stylus Photo R300 Series - Getting Photos into the Printer

Getting Photos into the Printer 19
Getting Photos into the Printer
Your EPSON Stylus Photo R300 Series printer can print photos stored:
■ On a memory card (see below)
■ In a digital camera (see page 20)
■ On a data storage device, such as a CD-R drive or an Iomega Zip drive (see page 20)
■ On a Bluetooth-enabled device with the optional Bluetooth Photo Print adapter (see
page 41)
The file storage device should comply with DCF (Design rule for Camera File systems)
Version 1.0.
However your photos are stored, make sure the image files meet these requirements:
■ JPEG files or uncompressed Tiff files only
■ Resolutions ranging from 160 × 160 to 4600 × 4600 pixels
■ No more than 999 images (although you may have additional images on your card or
storage device, the printer can read only the first 999)
Inserting a Memory Card
Your printer works with many types of memory cards. Follow these guidelines to insert your
memory card:
1. Make sure the printer is turned on, then insert the memory card into the appropriate slot,
as shown:
2. Close the memory card cover.
CompactFlash or
Microdrive
(left)
Memory Stick,
SD (Secure Digital), or
MMC (MultiMediaCard)
(middle)
SmartMedia or
xD Picture Card
(right)
Pbasics.book Page 19 Tuesday, June 1, 2004 1:31 PM