42 Printing Without a Computer
Disconnecting the Bluetooth Photo Print Adapter
Hold the Bluetooth adapter by the section that is connected to the printer, and pull it out
from the USB connector, as shown below.
Caution: Do not remove the adapter while it is communicating with another
device or while the printer is printing (while the blue light is flashing). Doing so
may cause the printer to malfunction. Do not remove the adapter by pulling on
the upper section. Doing so may damage the product.
Hold this section
Pbasics.book Page 42 Tuesday, June 1, 2004 1:31 PM
To Next Page
Loading...
