72 Printing From Your Computer
4. Insert the tray carefully, making sure it is level, not tilted up or down.
Push the tray under the tab and the two rollers.
Don’t push the tray in too far; line up the arrows exactly.
5. Follow the instructions in “Printing Your Design” below to print with EPSON Print CD.
Printing Your Design
After you have created your design and loaded a CD or DVD, you’re ready to print.
1. Open the File menu and select
Printer Settings (Windows) or Page Setup
(Macintosh).
2. Do one of the following:
■ Windows: Make sure Stylus Photo R300 is selected, the Paper Source is set to
Manual, and the Paper Size is set to A4.
Line up arrows
Keep tray level
Load tray under tab
Pbasics.book Page 72 Tuesday, June 1, 2004 1:31 PM
To Next Page
Loading...
