28 Printing Without a Computer
One-Touch Printing
If there are settings you may use often, you can create your own custom settings and recall
them at any time by pressing the
Custom button.
1. From the control panel, select any of the following settings you want to use:
Tip: It’s a good idea to make a note of the settings you’ve programmed into the
Custom button.
2. Press and hold the Custom button for at least three seconds, until you see a message
saying that your settings have been saved.
When you want to print, press the
Custom button to recall your settings. Make sure the
correct paper is loaded, then press
Print.
Tip: If you adjust any settings after pressing the Custom button, any additional
changes you make affect only the current print job and are not saved with your
custom settings.
■ Automatic Correction ■ Paper Type ■ Paper Size
■ Filter ■ Brightness ■ Layout
■ Saturation ■ Quality ■ Sharpness
■ Contrast
Pbasics.book Page 28 Tuesday, June 1, 2004 1:31 PM
To Next Page
Loading...
