76 Printing From Your Computer
6. Click OK (Windows) or Print (Macintosh). The confirmation pattern is printed on the
position check disk or CD.
7. Remove the position check disk or CD and measure the distance from the edge of the
hole to the small cross marks (distances labeled A and B as shown). You’ll need a metric
ruler with millimeters for these measurements.
8. Open the File menu and select
Adjust Print Position. You see a screen like this:
9. Make sure
Enter Values or Value Entry is checked, then input the A distance in the
Height (Top) or Top Space box. Enter the B distance in the Width (Right) or Right
Space
box.
10. Click
OK to save the measurements to the EPSON Print CD program.
Enter measurements here
Pbasics.book Page 76 Tuesday, June 1, 2004 1:31 PM
To Next Page
Loading...
