Epson Stylus Photo R800 - Page 43

EPSON Stylus Photo R800 Revision A
TROUBLESHOOTING Overview 44
At operation Paper is not fed. ASF Motor 1. Check that the Connector cable of the ASF Motor is
connected to the Relay Connector.
1. Connect the Connector cable of the ASF
Motor to the Relay Connector.
2. Using a tester, check the resistance value of the ASF
Motor.
Resistance value: 7.4Ω ± 10%
2. If the resistance value is abnormal,
change the ASF Motor for a new one.
3. Check the ASF Motor connector cable for damage. 3. Change the ASF Motor for a new one.
Table 3-4. Phenomenon-Based Paper Out Error Check Points
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
Relay Connector
ASF Motor
Download Service Manual And Resetter Printer at http://printer1.blogspot.com