Epson Stylus Photo RX600 - Scanning and Saving a Film to a Memory Card

54 Scanning by Using the LCD Panel and Buttons
Scanning and Saving a film to a Memory Card
1. Load a memory card (see “Loading Memory Cards” on page 26).
2. Press the Film Print button to enter the Film Print Mode.
3. Select Scan to Memory Card.
4. Select the film type (see “Selecting the Film Type” on page 47).
5. Select the desired photo and set the number of prints.
1. Select Scan to Memory Card.
2. Press the OK button.
1. Select the photo.
2. Set the number of prints.
3. Press the OK button.