Epson Stylus Photo RX600 - Scanning to a Computer; Using Epson Smart Panel

Using Additional Features 57
2. Press the Setup button and select the Direct print image set using
the u/d button, then press the OK button.
3. Adjust the settings on the digital camera (e.g. paper size, paper type,
and layout).
4. Change the print setting (see “Changing Print Settings” on page 40)
if necessary.
5. Print from the digital camera.
Saving the Images Stored in the Memory Card to
an External Device (Backup)
1. Make sure that this product and the external device are off.
2. Use a USB cable to connect the external device to this product and
turn on both of them.
3. Load a memory card containing the data and insert a media to the
external device.
1. Select Direct print image set.
2. Press the OK button.