Maintenance and Transporting 65
Maintenance and Transporting
Checking the Print Head Nozzles
If you find that the printed image is unexpectedly faint or some dots in
the printed image are missing, checking the print head nozzles helps you
to identify the problem.
Note:
When the ! Error light is on and a message appears on the LCD panel to prompt
you to replace the ink cartridge or to indicate the ink is low, you cannot clean
the print head. In this case, replace the appropriate ink cartridge first.
1. Make sure that A4 or Letter paper is loaded in the sheet feeder and
press the Setup button.
2. Select Nozzle Check.
3. Confirm the messages on the LCD panel, then press the OK button
to start the Nozzle Check.
1. Select Nozzle Check.
2. Press the OK button.
To Next Page
Loading...
