Epson Stylus Pro 4800 - Page 14

Epson Stylus Pro 4800
14 - Epson Stylus Pro 4800 8/05
You see the LFP Remote Panel. Make sure Stylus Pro
4800
is selected.
Note:
For more information on using the LFP Remote Panel, click
Help
to see the electronic guide.
5. Click the Firmware Updater button. You see the Firmware
Updater window.
6. Make sure your printer is on, its LCD is set to
Ready, and
it is connected to your computer, then choose
Stylus Pro
4800
in the Printer list.
7. Click
Browse and find the firmware that you just
downloaded and extracted. Select the file and click
Choose.
8. If the firmware version of the file is newer, click
Update to
start the firmware updating process. (If it is the same, you
don’t need to update.)
Caution:
Don’t turn off the printer while the firmware is updating.
9. When the update is complete, close the Firmware Updater
window, LFP Remote window, and the Printer Utility
window.
Updating with Windows
1. Double-click the firmware file to extract or unzip it.
2. Click
Start > Settings > Printers and Faxes.
3. Right-click the
EPSON Stylus Pro 4800 icon and click
Printing Preferences.
4. Click the
Utility tab, then click the EPSON LFP Remote
Panel
button.
Note:
If the button is grayed out, the LFP Remote Panel is not
installed. See the Printer Guide to install it.