Epson Stylus Pro 4800 - Replacing an Ink Cartridge

Epson Stylus Pro 4800
6 - Epson Stylus Pro 4800 8/05
Replacing an Ink Cartridge
The easiest way to check ink levels is from the control panel:
Tip:
You can store partially used ink cartridges for up to 6 months.
When the red B ink light is flashing (and INK LOW is
displayed on the LCD panel), the indicated cartridge is almost
out of ink. Make sure you have a replacement cartridge. When
the light stays on and
INK OUT is displayed, the cartridge is
empty. You must replace the cartridge before you can
continue printing.
You can install any combination of 110 ml and 220 ml
cartridges. It’s a good idea to keep a set of empty 110 ml
cartridges on hand at all times in case you need to ship the
printer.
See page 2 for information on selecting the correct
replacement cartridges. Before you start, make sure the printer
is turned on. Then follow these steps to replace an ink
cartridge:
1. Note the color of the cartridge whose light is on or flashing.
This is the cartridge you need to replace.
Caution:
Leave the empty cartridge in the printer until you are ready to
replace it. To prevent ink reporting errors, never replace the ink
cartridges with the printer turned off.
2. Press the ink compartment cover to open it.
3. Raise the ink levers to the unlocked position.
UNABLE TO PRINT — You tried to print while an error
condition was present.
Press the Pause button to exit the SelecType menu
system. If the message appears again, clear the error
before you print.
WRONG INK CRTG B Ink light on You tried to install the wrong ink
cartridge.
If you are installing ink cartridges for the first time, you
must install the cartridges that came with your printer.
If you are replacing ink cartridges, check the package
and product code. You must use the ink cartridges
designed for your printer. Other cartridges will not
work.
WRONG PAPER SIZE Paper light
flashing
Loaded paper does not match the
image size.
Make sure the size you selected in the printer driver
matches the loaded paper size. Load the correct size
paper if necessary.
Message/Light Light Explanation Response
1 2 3 4 5 6 7 8
Menu
3sec.
1
Matte
Black/
Photo
Black
2 Cyan
3 Magenta
4 Yellow
6 Light Cyan
8
Light
Light
Black
7 Light
Magenta
5 Light Black
Full
Empty