6-8
6-8 | Maintaining and Transporting the Printer
3. Locate the slot containing the empty ink cartridge (corresponding to the
Ink Out
light). Carefully pull the empty cartridge straight out of the
printer.
4. Make sure the replacement cartridge is the correct color, and remove it
from its package.
5. Hold the ink cartridge with the arrow mark face up and pointing to the
rear of the printer. Then insert the ink cartridge into the slot until the
corresponding
Ink Out
light goes off.
Warning
If ink gets on your hands,
wash them thoroughly with
soap and water. If ink gets
into your eyes, flush them
immediately with water.
Note
If you can’t insert the
cartridge smoothly, you
may have the wrong
cartridge. Check the
package and product
code.
To Next Page
Loading...
